Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
There are many options to choose from. follow thIs guide to help complete your order.
Option Guide DROP DOWN!!
Choosing a Pattern
For no additional charge, you can add a pattern to your device. Below are some of the pattern options.
Note: All patterns shown may look different or be unavailable on other devices.
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
Choosing Your Matching Drip Tip
Your Drip Tip will "match" the material you are choosing. Below is a description of each shape and an image.
All Tips use a SS Core Insert
Regular Bore Dimensions 510 and Threaded Integrals: 4.5mm
"MTL" Bore Dimensions: 3mm
"MTL" Bore Dimensions: 3mm
510 Tips are also available in either 12mm OD which fits most RDA/RTA Caps with raised lips without Overhang and 13mm OD which is Ideal for Boro Devices using 510 Adapter Nuts or Flat Top RDA's/RTAs
810 is also available in certain shapes and fit Most 810 style RDA/RTAs
All Tip Shapes can be adjusted by request. Taller, Shorter, Wider etc... leave a note in your cart before checkout - see Leaving a Note.
We CANNOT make the Bore Larger Than the Regular Bore Dimensions Above
We CANNOT make the Bore Larger Than the Regular Bore Dimensions Above
RDA/BORO STYLES |
|
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
Options for MTL of Full Bore Cannot be Married |
 |
|
 |
|
|
|
 |
50-50 Styles15mm Tall, 10.5mm Mouth, 4.5mm Bore |
|
|
|
 |
|
 |
What is a Married Material/Accent Bezel?
The Married Material (or Accent Bezel) is a different material that is added - "Married"- to the primary material choice in the form of a ring around the fire button and or the top edge of the tip
Some Materials cannot be married and certain marriages aren't compatible (Clear with Billet accent does not work but Billet with Clear accent does, we will choose the best marriage for whatever materials you decide on)
Matte Materials cannot Be Married.
For example, the image below shows an acrylic material with the Married Material: Billet Aluminum
Other Examples:
Color Options
All colors (including Black) are Dyed and Sealed by Default, while this provides almost 100% liquid proofing the sealant does NOT protect the color from wear and distressing, all colors will change with handling and the initial color of your device is superficial.
We will no longer offer Unsealed options as the sealant purpose is to help protect the device from liquid intrusion.
Black is the Natural Color for the Nylon Material we use, it is wear and tear resistant and easy to clean and maintain.
We recommend a warm damp (NOT SOAKING) soapy rag for spot cleaning and regular maintenance. Alcohol and rag or QTip can be used to remove residue oils, and if you wish, a light wipe down with Coconut oil or similar will help maintain luster but may darken the color further.
NOTE that again, all colors are subject to wear, darkening, distressing etc and all shades of color vary from device to device and pictures are for general reference only.
If you are unsure on how to clean and care for your device properly Please contact Charles Via FB Messenger for further information.
Single Color Options |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
Single Splash Devices are Black with Splash of Chosen Color
Double Splash are Black and Grey with Splash of Chosen Color.
We do not offer Splashing 2 colors because all Dyes are transparent and will just make Mud.
Single Fade 2 Colors Faded Top to Bottom, you choose both. Some color combinations are not possible and have been eliminated
Splash Fade is a combination of the 2 styles.
Splash Colors (June/December and Special Batches ONLY) |
|
 |
|
 |
|
 |
|
 |
Specs: VSE BMM Multi-Meter: The RatV2 21700 FetMech - Scroll Down to Bottom for Information
A single cell MosFet fired (Clickfet) squonk device.
- 21700 Battery and PA12 only.
- Quick access clip in door which is available with or without battery styling vents.
- The button cover is user removable to allow exchange of the firing button!
Clickfet specs:
- Mosfet:- N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46v (typ)
- Operational voltage: 3.1 ± 0.1V - 4.20v
- Low voltage protection: 3.1 ± 0.1V
- Reverse polarity protection: Yes. Mod will auto fire but board will not burn out.
- Idle current: <10uA
- Timeout Protection: Yes
- Amp Limit: 46.67A (4.2v @ 0.09Ω)
Functions and LED Information
- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection.
- On/Off Function: When off, 5 clicks turns on and LEDs flash 5 times. When on, 5 clicks turns off and LED's flash 5 times.
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet.
- Time Out Protection: If the mod is fired for 10 ± 1s the LEDs will flash 8 times and will stop powering the mosfet.
- Reverse Polarity Protection. If the battery is around the wrong way the mod will fire.
- In Use: When powering the mosfet the LEDs will be illuminated
RRP - 189.99+ Depending on options and accessories
With all MosFet mods, there is a chance of auto firing should the Fet fail. PLEASE REMOVE YOUR BATTERY WHEN UNATTENDED ie: sleeping.
BMM and it’s affiliates assume that you as an end user have a proper understanding of ohms law and safe vaping practices and does not take responsibility for accidents caused by improper or careless usage.
1
/
of
5
VSE BMM Multi-Meter: The RatV2 21700 FetMech - Scroll Down to Bottom for Information
VSE BMM Multi-Meter: The RatV2 21700 FetMech - Scroll Down to Bottom for Information
Regular price
$ 189.99
Regular price
Sale price
$ 189.99
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
Share
Add to this Product
1
/
of
12
Invalid password
Enter